Morse code translator
With soundType text to get Morse code, or paste dots and dashes to read them. Listen at any speed, watch the signal lamp or save it as a WAV file. Everything runs in your browser.
Listen to a character and type it. You start with two characters; add the next one when you get them right without thinking. Uses the speed and tone from the Translate tab.
0 of 0 right
What is Morse code?
Morse code writes letters, digits and punctuation as sequences of short and long signals, called dots and dashes (or dits and dahs). The signals can be sound, light, radio or taps. Today’s version is the International Morse code, defined by the ITU in Recommendation ITU-R M.1677-1. It covers the 26 letters A to Z, É, the digits 0 to 9, 13 punctuation marks and a few operating signals.
All of it rests on one unit of time, the length of a dot. A dash is three units, the gap inside a letter one unit, between letters three and between words seven. Morse code is an encoding, not encryption: anyone who knows the code can read it.
Every character, with sound
Click a character to hear it at the speed set above. Learn the sound, not the picture: experienced operators recognize a letter by its rhythm.
Letters
Numbers
Punctuation
Letters from other languages and extra signs common, not in the ITU standard
Prosigns and operating signals sent as one signal, without gaps between the letters
Some signs have no Morse code of their own. The ITU standard says how to send them, and the translator follows it: × is sent as X, % as 0/0 (2 % becomes 2-0/0), ‰ as 0/00, and typographic quotes as ". In text you can write prosigns in angle brackets, for example <SK> or <SOS>.
How Morse code timing works
The ITU standard defines five rules, all relative to the length of a dot:
- Dot
- 1 unit
- Dash
- 3 units
- Gap inside a letter
- 1 unit
- Gap between letters
- 3 units
- Gap between words
- 7 units
Speed is given in words per minute. The standard word is PARIS, which with the gap after it is exactly 50 units long. Sending it twenty times a minute is 20 WPM, so one unit is 1200 ÷ 20 = 60 ms.
| Speed | Dot | Dash | “SOS” takes | Typical use |
|---|---|---|---|---|
| 5 WPM | 240 ms | 720 ms | 5.5 s | US amateur licence exam until 2007 |
| 7 WPM | 171 ms | 514 ms | 3.9 s | Identifier of a VOR radio beacon |
| 12 WPM | 100 ms | 300 ms | 2.3 s | Good speed to start learning (Koch) |
| 15 WPM | 80 ms | 240 ms | 1.8 s | |
| 20 WPM | 60 ms | 180 ms | 1.4 s | Experienced operators, 20 to 30 WPM |
| 25 WPM | 48 ms | 144 ms | 1.1 s | |
| 30 WPM | 40 ms | 120 ms | 0.9 s |
Farnsworth spacing sends each character at full speed but stretches the gaps between letters and words, so the overall speed is lower. You hear the real rhythm of every letter and still have time to think. Set “Spacing” lower than “Speed” to try it. The tool uses the formula from Jon Bloom’s ARRL standard: at 18 WPM characters and 5 WPM overall, the gap between letters is 1.6 s and between words 3.7 s.
Reading and writing Morse code with the translator
- Text to Morse: type in the Text field. Letters come out separated by a space, words by
/, line breaks stay. - Morse to text: type or paste into the Morse field. Dots can be
.,·or•, dashes-,−,–or_. Words are separated by/,|or three spaces. If you paste Morse into the Text field, the tool notices and decodes it. - Listen: press Play. The lamp lights with each tone and the current letter is shown next to it. On phones you can feel it as vibration.
- Save: Download WAV gives you a sound file with the speed and tone you set, for practice on the go or for a puzzle.
- Unknown characters such as € or emoji have no Morse code. The tool leaves them out and tells you which ones. Accented letters without a code, like ó, are sent without the accent.
SOS, CQ and other signals
SOS (...---...) is sent as one continuous signal, without the gaps between letters. Germany used it from 1905; the first International Radiotelegraph Convention in Berlin made it the international distress signal, signed on 3 November 1906 and in force from 1 July 1908. The letters don’t stand for anything; the pattern is simply easy to recognize, even in noise.
On the air, operators use short abbreviations: CQ calls any station, DE means “from”, K invites the other station to transmit, and 73 means “best regards”. A typical call looks like this: -.-. --.- / -.-. --.- / -.. . / -.. .-.. .---- .- -... -.-. / -.-.
How to learn Morse code
- Learn the sound, not the chart. The psychologist Ludwig Koch showed in a 1936 study that operators recognize characters as acoustic patterns. Counting dots and dashes from a picture becomes a dead end at higher speeds.
- Start at a real speed. Koch found about 12 WPM best for first learning. Characters sent slower than that sound like separate dots and dashes, not like letters.
- Add one character at a time. Start with two, practise until you recognize them without thinking, then add the next. That is what the Practice tab does.
- Use Farnsworth spacing to get time between letters while the letters themselves keep their full speed.
- Practise briefly and often. Short, frequent sessions work better than rare long ones.
Where Morse code is still used
A short history of Morse code
- 1830sSamuel F. B. Morse and Alfred Vail develop the electric telegraph and its code. To keep messages short, Vail counts the type in a printer’s cases and gives the most common letters the shortest codes.
- 24 May 1844Morse sends “What hath God wrought?” from the Capitol in Washington to Vail in Baltimore, the first message on the line.
- 1848Friedrich Clemens Gerke revises the code for the Hamburg–Cuxhaven line. His version is adopted by the German-Austrian Telegraph Association in 1851 and by the International Telegraph Union in 1865. It is the basis of today’s International Morse code. North American landlines keep the original “American Morse”.
- 1906–1908The International Radiotelegraph Convention in Berlin adopts SOS as the distress signal, in force from 1 July 1908.
- 1997–1999On 31 January 1997 the French coast guard sends its last Morse message: “Calling all. This is our last cry before our eternal silence.” On 1 February 1999 the GMDSS replaces Morse for distress at sea.
- 2004The ITU adds the @ sign (
.--.-.), the first new sign since the Second World War, and publishes Recommendation M.1677. The current version, M.1677-1, dates from October 2009. - 2007After the 2003 World Radiocommunication Conference, the US FCC drops the Morse test for all amateur radio licences on 23 February 2007.
- 2018Google brings Morse code input to Gboard, first on Android, then on iOS.
Frequently asked questions
How do I translate Morse code to English?
Paste the dots and dashes into the Morse code field above and the text appears on the left. Separate letters with one space and words with a slash (/), a vertical bar or three spaces. The tool also reads ·, •, − and _.
What is SOS in Morse code?
SOS is ...---...: three dots, three dashes, three dots, sent as one signal without the pauses between letters. It is not an abbreviation for “save our souls”. It became the international distress signal on 1 July 1908. At 20 WPM it takes 1.4 s.
How do you say “I love you” in Morse code?
.. / .-.. --- ...- . / -.-- --- ..-. “Hello” is .... . .-.. .-.. ---. Type any text above to get its Morse code and hear it.
How do you write a space between words?
In sound, a space between words is a silence of seven dots; between letters it is three dots. In writing, letters are separated by a space and words by a slash: .... .. / -.-- --- ..-.
What is the difference between a dot and a dash, or a dit and a dah?
They are the same thing. A dash lasts three times as long as a dot. Operators say “dit” and “dah” because Morse code is learned by sound, not by counting symbols.
How fast is Morse code?
Speed is measured in words per minute (WPM) with the word PARIS as the standard: one word is 50 dot lengths. A dot lasts 1200 ÷ WPM milliseconds, so 60 ms at 20 WPM. Experienced operators send and receive 20 to 30 WPM; US amateur licence exams asked for 5 WPM until 2007.
Is Morse code still used today?
Yes. Radio amateurs use it every day, aviation radio beacons such as VORs identify themselves with three letters in Morse, and it helps people with limited mobility type, for example on Google’s Gboard keyboard. Ships stopped using it for distress calls on 1 February 1999.
Who invented Morse code?
Samuel F. B. Morse and his partner Alfred Vail developed the telegraph and its code in the late 1830s. The first long-distance message, “What hath God wrought?”, went from Washington to Baltimore on 24 May 1844. Today’s International Morse code is based on Friedrich Clemens Gerke’s 1848 revision.
Does Morse code have lowercase letters?
No. Morse code makes no difference between capital and small letters. The translator accepts both and returns capitals.
Can Morse code write Ä, Ñ or other letters?
The international standard only covers A to Z, É, digits and some punctuation. Codes for Ä, Ö, Ü, Ñ, Ç and a few others are common but not standardized; they are listed in the chart. Other accented letters are sent without the accent, and the translator tells you when it does that.
Is Morse code a form of encryption?
No. Morse code is an encoding: anyone who knows the code can read it. To keep a message secret, encrypt it first, for example with AES-256-CBC, and send the result.
How long does it take to learn Morse code?
It depends on how often you practise. Short daily sessions work better than long ones. Learn each character as a sound at a speed of about 12 WPM or more instead of memorizing the chart, and add a new character only when you recognize the ones you know. The Practice tab above does exactly that.
How do I send Morse code with a flashlight?
Use the same timing as sound: light on for one unit for a dot and three units for a dash, off for one unit between them, three between letters and seven between words. Go slowly, about 5 WPM (a 240 ms dot), so the other person can follow. The lamp in the tool shows the rhythm.
What do CQ, DE, K and 73 mean?
They are common radio abbreviations: CQ calls any station, DE means “from”, K invites the other station to transmit (it is also an ITU operating signal), and 73 means “best regards”.
What is the Morse code for the @ sign?
.--.-., an A and a C without a pause. The ITU added it in 2004, the first new sign since the Second World War.
Why is E a single dot?
To make messages short, the most common letters got the shortest codes. Alfred Vail estimated how often each letter is used by counting the type in a newspaper’s type cases in Morristown, New Jersey. E, the most common letter in English, became a single dot and T a single dash.
Where the facts come from
- ITU-R M.1677-1 (10/2009), International Morse code
- Library of Congress: “What hath God wrought?”, 24 May 1844
- International Radiotelegraph Convention, Berlin 1906 (SOS)
- IMO: GMDSS fully implemented on 1 February 1999
- ARRL: FCC drops Morse testing for all amateur licence classes
- J. Bloom, KE3Z: A Standard for Morse Timing Using the Farnsworth Technique (QEX, April 1990)
- Google: Making Morse code available to more people on Gboard (2018)
- FAA Aeronautical Information Manual: identifying a VOR by its Morse code
Last updated 19 November 2026. Characters and timing follow ITU-R M.1677-1; the translator is checked against the standard’s tables.